Sensores de temperatura conectables a PC

To measure and log temperatures of a room or a pipe using a PC, you need a 1-wire Adaptor (USB or Serial DB9) and a sensor. We offer 3 types of temperature sensors, with different enclosures. Features: - Temperature Range : From - 55ºC to + 125 ºC - Accuracy : +/- 0,5 ºC from -10 ºC to + 85 ºC - Sensor Chip : DS18S20 - Several sensors can be connected together, in parallel, to one adaptor. - Each sensor has its own unique number which is used by the software to identify it. - Distance between sensor and PC can be up to 100 mt, depending on the type of cable. - You can use regular 2-wire telephone cable to connect the sensors to the PC, but for best results and longer distances use UTP Cat 5 cable (network cable).
Serial DB9 to 1-wire adaptor	USD 22.00
USB to 1-wire adaptor	USD 59.00
Basic Sensor A 2.5 cm long copper cilinder of 5/16" diameter, with the sensor chip inside, sealed with epoxic putty. Comes with 20 cm cable. This is a multi-purpose temperature sensor. It can be used for sensing ambient air or anything else. Do not put directly inside a liquid.	USD 20.00
Overlay Sensor for 1/2" or 3/4" pipes. Specially suitable for measuring temperatures of liquids inside a copper pipe. It's made of a concave plate of copper 3 cm long. Sensor chip is enbedded in epoxic putty on the inside part of the plate. It can be easily attached externally to any 1/2" or 3/4" copper pipe. You will not need to cut the pipe. Comes with 20 cm cable. After attaching the sensor to a pipe, sensor and pipe should be covered with insulation material so that ambient temperature will not interfere with measurement.	USD 20.00
Terminal sensor 1/2" or 3/8" thread Sensor is embedded in epoxic putty inside the bronze Terminal. It is put into the "Tee" fitting, almost in touch with the liquid to be measured. After attaching the sensor to the fitting, it should be covered with insulation material so that ambient temperature will not interfere with measurement.	USD 24,00